I-3240 Insulating Glass Epoxy Laminate

Incazelo emfushane:

Ibhodi le-epoxy yalo mkhiqizo: indwangu ye-fiber yengilazi ihlanganiswe ne-epoxy resin futhi yenziwa ngokushisa nokucindezela.Imodeli ingu-3240. Inezici eziphezulu zemishini ekushiseni okuphakathi kanye nezakhiwo zikagesi ezizinzile ekushiseni okuphezulu.Ifaneleka ezingxenyeni eziphakeme ze-insulation zesakhiwo semishini, izinto zikagesi kanye ne-electronics, ezinezakhiwo eziphezulu zemishini kanye ne-dielectric, ukumelana nokushisa okuhle nokumelana nomswakama.Isigaba E sokumelana nokushisa (125 degrees).

Ubukhulu obujwayelekile: 0.5 ~ 100mm
Usayizi ojwayelekile: 1020×2040mm
Iyashisisa futhi ikhubazekile ekushiseni okuphezulu okungu-180 ℃, ngokuvamile ayishisi nezinye izinsimbi, okungase kubangele ukuwohloka kweshidi lensimbi.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Izici zohlelo lokusebenza

1. Amafomu ahlukahlukene.
2. Kulula ukwelapha.

3. Ukunamathela okuqinile.
4. Amafomu ahlukahlukene.

Imininingwane Yomkhiqizo

CHA.	IZIMPAHLA	I-UNIT	INANI ELIZINGA
1	Amandla e-Flexural perpendicular to laminations A: Ngaphansievamileizimo E-1/150: Ngaphansi kwe-150±5℃	I-MPa	≥ 340
2	Amandla we-Notch Impact ahambisana ne-lamination(i-charpy)	kJ/m²	≥33
3	Ukumelana ne-insulation ngemva kokucwiliswa emanzini (D-24/23)	Ω	≥5.0X10⁸
4	Amandla e-Dielectric perpendicular to lamination(emafutheni 90±2℃)1.0mm ubukhulu	MV/m	≥14.2
5	I-voltage yokuhlukaniswa parallel kulaminathiion (emafutheni 90±2℃)	kV	≥35
6	Izimvume(48-62Hz)	-	≤ 5.5
7	Izimvume(1MHz)	-	≤5.5
8	Isici sokulahla (48-62Hz)		≤0.04
9	Imboni yokulahla (1MHz)		≤0.04
10	Ukumuncwa kwamanziD24/23, 1.6mm ubukhulu	mg	≤19
11	Ukuminyana	g/cm³	1.70-1.90
12	Ukuvutha	Ikilasi	-
13	Umbala		Okwemvelo